Brother International NX-600 Users Manual - English - Page 35
When using the twin needle, be sure to, attach zigzag foot J, otherwise
View all Brother International NX-600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
CONTENTS GETTING READY SEWING BASICS UTILITY STITCHES Insert the extra spool pin onto the bobbin d winder shaft. Insert the extra spool pin so that it is perpendicular to the bobbin winder shaft. 1 • For details, refer to step h through j of "Threading the upper thread" (page 24). Without passing the thread through the needle h bar thread hook, manually thread the right needle. Pass the thread through the eye of the needle from the front. a Bobbin winder shaft Swing down the spool pin so that it is e horizontal. Place the upper thread spool for the needle on f the right side onto the extra spool pin, and then secure it with the spool cap. The thread should unroll from the top front of the spool. 1 2 • The needle threader cannot be used with the twin needle. If the needle threader is used with the twin needle, the sewing machine may be damaged. Attach zigzag foot "J". i • For details on changing the presser foot, refer to "Replacing the presser foot" (page 37). CAUTION ● When using the twin needle, be sure to attach zigzag foot "J", otherwise the needle may break or the machine may be damaged. Turn on the sewing machine. j a Spool cap b Spool Thread the upper thread in the same way that g the upper thread for the left side was threaded. 1 X The LCD comes on. Press (Settings key) in the operation panel. k X The settings screen appears. Press , , and (Arrow keys) until l is selected. APPENDIX INDEX a Thread guide cover Upper Threading 29