Brother International NX-600 Users Manual - English - Page 108
Darning, Attach buttonhole foot A.
View all Brother International NX-600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 108 highlights
UTILITY STITCHES Darning Fabric that has been torn can be darned. Darning is sewn as shown below. 1 CONTENTS GETTING READY SEWING BASICS UTILITY STITCHES 1 a Reinforcement stitching Determine the desired length of the darning. a Set the button guide plate on buttonhole foot "A" to the desired length. (The distance between the markings on the presser foot scale is 5 mm (3/16 inch).) 1 Position the fabric so that the needle is 2 mm d (1/16 inch) in front of the area to be darned, and then lower the presser foot lever. 2 3 4 a Presser foot scale b Length of darning c 5 mm (3/16 inch) d 7 mm (1/4 inch) • A bar tack with a maximum length of about 28 mm (1-1/8 inch) can be sewn. Attach buttonhole foot "A". b • For details, refer to "Replacing the presser foot" (page 37). Select stitch 52 or 53 . c • For details, refer to "Selecting stitching" (page 66). 2 1 a Tear b 2 mm (1/16 inch) Pass the upper thread down through the hole in the presser foot. • When lowering the presser foot, do not push in the front of the presser foot, otherwise the darning will not be sewn with the correct size. 1 a Do not reduce the gap. 102 APPENDIX INDEX