Brother International NX-600 Users Manual - English - Page 41
Checking the needle, is accidentally pressed and the machine
View all Brother International NX-600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
CONTENTS GETTING READY SEWING BASICS UTILITY STITCHES Checking the needle Sewing with a bent needle is extremely dangerous since the needle may break while the machine is being operated. Before using the needle, place the flat side of the needle on a flat surface and check that the distance between the needle and the flat surface is even. Replacing the needle Replace the needle as described below. Use the screwdriver and a needle that has been determined to be straight according to the instructions in "Checking the needle". Press (Needle position button) once or a twice to raise the needle. 1 2 1 a Flat side b Needle type marking ■ Correct needle a Needle position button Turn off the sewing machine. b 1 a Flat surface ■ Incorrect needle If the distance between the needle and the flat surface is not even, the needle is bent. Do not use a bent needle. CAUTION ● Before replacing the needle, be sure to turn off the sewing machine, otherwise injuries may occur if the start/stop button is accidentally pressed and the machine starts sewing. Lower the presser foot lever. c 1 a Flat surface 1 a Presser foot lever APPENDIX INDEX Replacing the Needle 35