Brother International NX-600 Users Manual - English - Page 54
Starting to sew, Start/stop button once.
View all Brother International NX-600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
SEWING BASICS Starting to sew Press b (Start/stop button) once. CONTENTS Once you are ready to start sewing, you can start the sewing machine. The sewing speed can be adjusted using either the operation buttons or the foot controller. Note Important: z When the foot controller is plugged in, the start/stop button cannot be used to start or stop sewing. 1 a Start/stop button X The machine starts sewing. GETTING READY SEWING BASICS UTILITY STITCHES ■ Using the operation buttons Sewing can be started and stopped using the operation button (Start/stop button). Slide the sewing speed controller to the left or a right to select the desired sewing speed. Slide the sewing speed controller to the left to sew at a slower speed, or slide the speed controller to the right to sew at a faster speed. 1 a Sewing speed controller • If you continue to hold the start/stop button pressed immediately after the sewing starts, the machine will sew at a slow speed. When the end of the stitching is reached, press c (Start/stop button) once. X The machine stops sewing with the needle down (in the fabric). When you are finished sewing, raise the d needle, and then cut the threads. X For details, refer to "Cutting the thread" (page 51). ■ Using the foot controller Sewing can be started and stopped using the foot controller. APPENDIX Turn off the sewing machine. a When connecting the foot controller, be sure to turn off the sewing machine in order to prevent the machine from accidentally being started. INDEX 48