Brother International PC-7000 Users Manual - English - Page 107

ERROR MESSAGE When the machine is not properly set and "START/STOP" button is pressed, or a correction on your operation is required, machine does not start and will instruct you with an alarm and warning message on LCD. Warning message Return bobbin winding shaft to left. When bobbin winding shaft is located at right side, button for "NEEDLE POSITION" or "AUTOMATIC THREAD CUTTER" is pressed. Lower presser foot lever. When presser foot is at upper position, button for "START/STOP" or "AUTOMATIC THREAD CUTTER is pressed. Lift blue lever (1). When buttonhole lever is lowered, pattern other than buttonholes is selected and button for "START/STOP", "ENFORCEMENT STITCH" or Foot controller is pressed. (1) .• (1) Lower blue lever (1). When buttonhole lever is raised, buttonhole is selected and button for "START/STOP", "ENFORCEMENT STITCH" or Foot controller is pressed. * In this case, the machine works one cycle. Select pattern. When any pattern is not selected and any of the following keys are pressed, • "START/STOP" button • "ENFORCEMENT STITCH" button • "AUTOMATIC THREAD CUTTER" button • Foot controller • "STITCH ADJUSTMENT" key • "SEWING APPLICATION" key 105