Brother International PC-7000 Users Manual - English - Page 39
Stitch, Length, Stitch, Width
View all Brother International PC-7000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
Sewing edge 6. Open the hole In case of normal buttonhole and rounded buttonhole. Insert a pin in front of the inside edge of both bar tacks. Insert seam ripper into centre of buttonhole. Cut towards the first pin. Then do the same for the other side. 0 Pin 'STITCH LENGTH 0.4 mm S In case of Keyhole buttonhole Make a hole using a small eyelet punch on the key end, insert a pin to the inside edge of the bar tack. Insert seam ripper into hole and cut towards the pin. Touch "STITCH ADJUSTMENT" and adjust the stitch length by "L" (Long) or "S" (Short). O Normal position 0.4 mm (0.016 inch) • Long • Short If the stitch length is too close, adjust the stitch legth by pressing "L" (Long). 1. Touch "BASIC OPERATION". 2. Touch "USEFUL SKILL". 3. Touch key you desire. To change stitch width STITCH WIDTH 5.0 mm o 11=31 -6 -6- 0 IICZ===201 Touch "STITCH ADJUSTMENT" and adjust the stitch width by "W" (Wide) or "N" (Narrow). O "AUTO" position 5.0 mm (0.197 inch) • "N" (narrow) 37