Brother International PC-7000 Users Manual - English - Page 35
reinforcement, elastic, material, change, stitch, length, needle, position, STITCH, WIDTH
View all Brother International PC-7000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
In case of reinforcement or elastic material Baste the fabric beforehand and sew along to the basting using stretch straight stitch. * You cannot change stitch length of stretch straight stitch. * Don't pull the fabric during sewing. O Basting To change stitch length -6 - -0- Touch "STITCH ADJUSTMENT" and adjust the stitch length by touching "L" (Long) or "S" (Short) on screen. O Original length: 2.5 mm (0.098 inch) • Long • Short * In case of thin material less than 1 mm (0.039 inch), stitch length is set 4 mm (0.157 inch) automatically during sewing even if you set the length at 5 mm (0.197 inch). To change needle position STW ITCIHDTfiH i 0 • 0.0 mm Touch "STITCH ADJUSTMENT" and adjust the needle position by touching "W" (Right) or "N" (Left) on screen. O Needle position: 3.5 mm (0.138 inch) • Needle position: 7.0 mm (0.276 inch) • Needle position: 0.0 mm (0.0 inch) 33