Brother International PE-DESIGN Ver.6 Users Manual - English - Page 85

PeDesignV6Eng.book Page 77 Thursday, July 8, 2004 11:59 AM Design Center Stage 3 (Figure Handle Stage) Advanced Opreation Design Center a Note: You will not be able to enlarge the image beyond the limits of the Design Page area. If necessary, click Design Page Property, and then change the Design Page size in the dialog box that appeared. 5. To select a specific part of the image, click Pick Area, drag the pointer ( ) across the image in the Design Page to select the desired area. b Memo: The Figure Object Conversion Setting dialog box appears again when the mouse button is released. 6. Click OK. → The figure handle image is displayed in the Design Page of stage 3 (Figure Handle stage). b Memo: To close the dialog box without applying the changes to the settings, click Cancel. a Note: If the outline data cannot be created from the image when moving from stage 2 (Line Image stage) to stage 3 (Figure Handle stage), even after various outline conversion settings are specified, return to stage 2, and correct the outlines in the line image or apply corrections from the image. c "Creating a new Design Page in stage 2 (Line Image stage)" on page 74, "Continuing to Stage 4 (Sew Setting Stage)" on page 83, "Changing the grid settings" on page 105, and "Specifying the Design Page size" on this page Specifying the Design Page size In stage 3 (Figure Handle stage), you can select a Design Page size according to the size of hoop that you will be using with your sewing machine, or you can customize the size to fit even very large embroidery patterns. 1. Click Option, then Design Page Property. → The Design Page Property dialog box appears. 2. Select the Design Page size. To adjust the Design Page size according to the hoop size, select Hoop Size, and then select the desired hoop size from the selector. To specify a custom Design Page size, select Custom Size, and then type or select the desired width and height for the Design Page. (The setting range is 100 to 1000 mm (3.9 to 39.4 inches).) b Memo: • The preview area shows the setting changes that you make. • When Hoop Size is selected, the sewing machine image shows the orientation of the Design Page (hoop) in relation to the machine. a Note: • When Hoop Size is selected, do not select a size larger than the maximum embroidering area for your machine. 3. Click OK. b Memo: • To return to the default settings (100 × 100 mm (4" × 4") of Hoop Size), click Default. • To close the dialog box without applying the changes to the settings, click Cancel. 77