Canon PIXMA MP950 MP950 User's Guide - Page 19

Turning the Machine ON and OFF Turn on the machine before starting printing. „ Turning on the Machine Before turning on the machine, confirm that the Print Head and ink tanks are set into place. Note If preparatory operations above are not yet finished, follow the Easy Setup Instructions to complete them. 1 Open the Operation Panel, then press [ON/OFF]. The Power Lamp flashes green for a while, and then turns on. Note If the Alarm Lamp lights or flashes orange and an error message is displayed on the LCD, see "An Error Message is Displayed on the LCD" on page 115. „ Turning off the Machine 1 To turn off the machine, press [ON/OFF]. The machine is off when the Power Lamp stops flashing and all Operation Panel lamps are off. Important When removing the power plug after turning off the machine, be sure to check that all the lamps on the Operation Panel are not lit. If the power plug is removed from the wall outlet with the lamps on the Operation Panel lit or blinking, the machine cannot protect its Print Head and may be unable to print. See "Keeping the Best Printing Results" on page 101. „ Setting the Power Save Mode The machine enters Power save mode if not operated for a certain interval. In the Power save mode, the internal fluorescent lamp are turned off, and the selected Mode Lamp and the Power Lamp stay lit. You can configure the interval that the machine waits before entering Power save mode. See "Power save setting" on page 95. When you try to copy or scan, the machine will exit from Power save mode. If you use the machine frequently, we recommend that you set the Power save transfer time to 1 hour or 8 hours. „ The Screen-saver Mode The LCD goes out if the machine is not operated for 5 minutes. Press any button to restore the display. You cannot change the period before the LCD goes out. Chapter 1 Before Printing 17