Canon imageFORMULA DR-2010M Workgroup Scanner User Manual - Page 98
Removing and Attaching the Rollers and Document Holding Guide, Roller Replacement Cycle
View all Canon imageFORMULA DR-2010M Workgroup Scanner manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 98 highlights
Contents Back Previous Page Next Page 2. Removing and Attaching the Rollers and Document Holding Guide To clean or replace the feeding roller, retard roller, or document holding guide, remove and then attach the parts as described in each respective section. CAUTION Do not use excessive force when removing or attaching the rollers and document holding guide. Doing so many damage them. Resetting the Counter After replacing the feed rollers, open the counter settings dialog box and reset the counter. Under Windows 1 From the Windows task bar, click [Start] → [Control Panel]. Roller Replacement Cycle When the rollers have fed more than 100,000 pages, a roller replacement message appears on the computer. Purchase an exchange roller kit and replace the feeding roller and the retard roller. IMPORTANT • Rollers are consumable parts. When the rollers start to wear out, paper jams and misfeeds may occur more often. When this happens, purchase an exchange roller kit and replace the feeding roller and the retard roller. • If misfeeds occur often, check the rollers for wear, and replace them if necessary before the message is displayed. • Make sure to reset the counter after replacing the rollers (See "Resetting the Counter," on p. 98.). • For information about the exchange roller kit (feeding roller, retard roller,) contact your local authorized Canon dealer or service representative. 2 Double-click [Printers and Other Hardware] in the working field → click [Scanners and Cameras]. Control Panel (Category View) Printers and Other Hardware 98