Casio QT 6000 Service Manual - Page 78
Casio QT 6000 - 32 MB RAM Manual
View all Casio QT 6000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 78 highlights
PIN NAME XT XT VCK RESET TEST0 TEST1 SG MIN LIN MOUT LOUT AOUTL AOUTR DVDD DGND AVDD AGND I/O DESCRIPTION I O Oscillator connection pins. When external clock is used, input clock into XT pin and leave XT pin open. Outputs sampling frequency selected at recording or playback. O VCK pin is used as a synchronizing signal when external ADC or DAC is used. I When this pin is "L" level input, the LSI is initialized. I Pins for testing. Set the pins to "L". O Analog circuit signal ground output pin. Inverting input pin for built-in OP amplifier. Noninverting input pin is connected to SG (Signal Ground) I internally. O MOUT is the output of internal OP amplifier to MIN, and LOUT is to LIN. Left analog output pin from built-in LPF. This is the output pin of playback wavefroms, and is connected to O the amplifier for driving speakers. Right analog output pin from built-in LPF. This is the output pin of playback wavefroms, and is connected to O the amplifier for driving speakers. - Digital power supply pin. Insert a minimum 0.1 mF bypass capacitor between this pin and DGND pin. - Digital GND pin. - Analog power supply pin. Insert a minimum 0.1 mF bypass capacitor between this pin and AGND pin. - Analog GND pin. - 76 -