Cisco ATA188-I2-A Administration Guide - Page 106
FeatureTimer, Description, Value Type, Default, Voice Configuration Menu Access Code
View all Cisco ATA188-I2-A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 106 highlights
Operational Parameters Chapter 5 Parameters and Defaults FeatureTimer Description This parameter provides configurable timing values for various telephone features, as described below: • Bits 1-15-Reserved. • Bits 16-18-Configurable call waiting ring timeout. When a call arrives for a Cisco ATA port that is in use and has call-waiting enabled, the Cisco ATA plays a call-waiting tone. If the incoming call is not answered within a specified period of time, the Cisco ATA can reject the call by returning a "486 Busy" response to the remote user agent. You can configure FeatureTimer parameter bits 16-18 to specify the ringing period for incoming call-waiting calls. This feature can be disabled by either using the default value 0 or by setting bits 16-18 to a value greater than the standard timeout for an incoming call as specified in SigTimer parameter bits 14-19. When this feature is disabled, a "480 Temporarily Not Available" response is returned to the remote user agent when the standard ring times out. - Range: 0 - 7 - Factor: 10-second increments - Values: 0 to 70 seconds - Default: 0 (never timeout) • Bits 19-31-Reserved. Value Type Bitmap Default 0x00000000 Voice Configuration Menu Access Code 317 5-30 Cisco ATA 186 and Cisco ATA 188 Analog Telephone Adaptor Administrator's Guide for H.323 (version 3.0) OL-4804-01