Cisco ATA188-I2-A Administration Guide - Page 88
DNS2IP, VLANSetting, Description, Value Type, Default, Voice Configuration Menu Access Code
View all Cisco ATA188-I2-A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 88 highlights
Network Configuration Parameters Chapter 5 Parameters and Defaults DNS2IP Description This parameter is for setting the secondary domain name server (DNS) IP address, if the DHCP server does not provide one. If DHCP provides DNS2IP (if it is non-zero), this parameter overwrites the DHCP-supplied value. You cannot specify a port parameter. The Cisco ATA uses the default DNS port only. Value Type IP address Default 0.0.0.0 Voice Configuration Menu Access Code 917 VLANSetting Description This parameter is for firmware version 2.15 and above. Bitmap definitions are as follows for the VLANSetting parameter: • Bits 0-2-Specify VLAN Class of Service (CoS) bit value (802.1P priority) for signaling IP packets. • Bits 3-5-Specify VLAN CoS bit value (802.1P priority) for voice IP packets. • Bits 6-17-Reserved. • Bits 18-29-User-specified 802.1Q VLAN ID. • Bits 30-31-Reserved. Value Type Bitmap Default 0x0000002b Voice Configuration Menu Access Code 324 Related Parameter OpFlags, page 5-34 5-12 Cisco ATA 186 and Cisco ATA 188 Analog Telephone Adaptor Administrator's Guide for H.323 (version 3.0) OL-4804-01