Cisco ATA188-I2-A Administration Guide - Page 137
NPrintf, SyslogIP, Description, Syntax, Example, Value Type, Default
View all Cisco ATA188-I2-A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 137 highlights
Chapter 5 Parameters and Defaults Diagnostic Parameters NPrintf SyslogIP Description Use this parameter to specify the IP address and port of a host to which all Cisco ATA debug messages are sent. The program prserv.exe, which comes bundled with the Cisco ATA software, is needed to capture the debug information. Syntax , Example If the program prserv.exe is running on a host with IP address 192.168.2.170 and listening port 9001, set NPrintf to 192.168.2.170.9001. This causes the Cisco ATA to send all debug traces to that IP address. Value Type Extended IP address Default 0 Voice Configuration Menu Access Code 81 Description Use this parameter for diagnostic purposes; specify the IP address and port number to which the Cisco ATA should send its syslog output information. The program prserv.exe, which is included in all Cisco ATA software upgrade packages, can be used to capture syslog information if you do not have a syslog server. Syntax . Example If you want to send syslog information to the host at IP address 192.168.2.170 and port number 514, do the following: • Configure the value of this parameter as 192.168.2.170.514 • On your PC, run the command: prserv 514 Value Type Extended IP address Default 0.0.0.0.514 OL-4804-01 Cisco ATA 186 and Cisco ATA 188 Analog Telephone Adaptor Administrator's Guide for H.323 (version 3.0) 5-61