Cisco ATA188-I2-A Administration Guide - Page 43
Basic Configuration Steps in a Non-TFTP Server Environment, Table 3-4, Upgrading the Signaling
View all Cisco ATA188-I2-A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
Chapter 3 Configuring the Cisco ATA for H.323 Steps Needed to Configure the Cisco ATA Basic Configuration Steps in a Non-TFTP Server Environment Table 3-4 shows the basic steps for configuring the Cisco ATA without using the TFTP server method. Table 3-4 Basic Steps to Configure the Cisco ATA Without Using the TFTP Server Method Action Reference 1. Download the desired Cisco ATA release software zip file from the Cisco web site: a. If you are a registered CCO user. go to the following URL: http://www.cisco.com/cgi-bin/tablebuild.pl/ata186 b. Download the zip file that contains the software for the applicable release and signaling image you are using. The contents of each file are described next to the file name. c. Extract the files to the desired location on your PC. Note The file that contains the protocol signaling image has an extension of .zup. 2. Manually upgrade the Cisco ATA to the correct signaling image. 3. Configure the Cisco ATA by using either one of the manual-configuration methods. 4. Power up the Cisco ATA. Upgrading the Signaling Image Manually, page 8-2 • Voice Configuration Menu, page 3-20 • Cisco ATA Web Configuration Page, page 3-23 OL-4804-01 Cisco ATA 186 and Cisco ATA 188 Analog Telephone Adaptor Administrator's Guide for H.323 (version 3.0) 3-7