Cisco CP-7961G-GE Administration Guide - Page 102
Ethernet Configuration Menu, Security Configuration Menu
View all Cisco CP-7961G-GE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 102 highlights
Device Configuration Menu Chapter 4 Configuring Settings on the Cisco Unified IP Phone Ethernet Configuration Menu The Ethernet Configuration menu includes the options that are described in Table 4-16. Table 4-16 Ethernet Configuration Menu Option Option Forwarding Delay Span to PC Port Description To Change Indicates whether the internal switch begins forwarding packets between the PC port and switched port on the phone when the phone becomes active. From Cisco Unified Communications Manager Administration, choose Device > Phone > Phone Configuration. • When forwarding delay is set to disabled, the internal switch begins forwarding packets immediately. • When forwarding delay is set to enabled, the internal switch waits eight seconds before forwarding packets between the PC port and the switch port. Default is disabled. Indicates whether the phone will forward packets From Cisco Unified Communications Manager transmitted and received on the network port to the Administration, choose Device > Phone > Phone access port. Configuration. Enable this option if an application that requires monitoring of the phone's traffic is being run on the access port. These applications include monitoring and recording applications (common in call center environments) and network packet capture tools that are used for diagnostic purposes. Security Configuration Menu The Security Configuration that you access directly from the Settings menu provides information about various security settings. It also provides access to the Trust List menu. The Trust List menu indicates if the CTL or ITL files are installed on the phone. Note The phone also has a Security Configuration menu that you access directly from the Settings menu. For information about the security options on that menu, see Security Configuration Menu, page 4-38. Table 4-17 describes the options on the Security Configuration menu. Table 4-17 Security Configuration Menu Options Option PC Port Disabled Description To Change Indicates whether the access port on the phone is enabled (Yes) or disabled (No). Must be set to enabled for video support on the phone From Cisco Unified Communications Manager Administration, choose Device > Phone > Phone Configuration. 4-30 Cisco Unified IP Phone Administration Guide for Cisco Unified Communications Manager 8.0 (SCCP and SIP) OL-21011-01