Cisco CP-7961G-GE Administration Guide - Page 138

Configuring Corporate and Personal Directories Chapter 5 Configuring Features, Templates, Services, and Users Table 5-2 Configuration parameters for Cisco Unified IP Phones Configuration Window Enterprise Phone Configuration window Common Phone Profile window Phone Configuration window Path System > Enterprise Phone Configuration Device > Device Settings > Common Phone Profile Device > Phone; Product Specific Configuration portion of window Parameters You can set the following parameters in any of the three configuration windows: • Settings Access • Video Capabilities • Web Access • Load Server • RTCP • Peer Firmware Sharing • Cisco Discovery Protocol (CDP): Switch Port • Cisco Discovery Protocol (CDP): PC Port • Link Layer Discovery Protocol Media Endpoint Discover (LLDP-MED): Switch Port • Link Layer Discovery Protocol (LLDP): PC Port • IPv6 Load Server • 802.1x Authentication Note When you set the parameters, select the Override Common Settings checkbox for each setting you wish to update. If you do not check this box, the corresponding parameter setting does not take effect. If you set the parameters at the three configuration windows, the setting takes precedence in the following order: • Phone Configuration window • Common Phone Profile window • Enterprise Phone Configuration window Configuring Corporate and Personal Directories The Directories button on the Cisco Unified IP Phone 7962G and 7942G gives users access to several directories. These directories can include: 5-20 Cisco Unified IP Phone Administration Guide for Cisco Unified Communications Manager 8.0 (SCCP and SIP) OL-21011-01