Cisco CP-7961G-GE Administration Guide - Page 109
Device > Device, Settings > Common Device Configuration, Displaying a Configuration Menu
View all Cisco CP-7961G-GE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 109 highlights
Chapter 4 Configuring Settings on the Cisco Unified IP Phone Device Configuration Menu Table 4-19 Network Configuration Menu Options (continued) Option Description To Change Auto IP Configuration Displays whether the auto configurations is enabled or disabled on the phone. The Auto IP Configuration setting along with the DHCPv6 setting determine how the IP Phone obtains its IPv6 address and other network settings. For more information on how these two settings affect the network settings on the phone, see Table 4-5. From Cisco Unified Communications Manager Administration, choose Device > Device Settings > Common Device Configuration. Note Use the "Allow Auto-Configuration for Phones" setting in Cisco Unified Communications Manager Administration. IPv6 Load Server Used to optimize installation time for phone firmware upgrades and off load the WAN by storing images locally, negating the need to traverse the WAN link for each phone's upgrade. Use Cisco Unified Communications Manager Administration to modify. You can set the Load Server to another TFTP server IP address or name (other than the IPv6 TFTP Server 1 or IPv6 TFTP Server 2) from which the phone firmware can be retrieved for phone upgrades. When the Load Server option is set, the phone contacts the designated server for the firmware upgrade. Note The Load Server option allows you to specify an alternate TFTP server for phone upgrades only. The phone continues to use IPv6 TFTP Server 1 or IPv6 TFTP Server 2 to obtain configuration files. The Load Server option does not provide management of the process and of the files, such as file transfer, compression, or deletion. IPv6 Log Server Note When you configure both an IPv6 Load Server and a Load Server (for IPv4), the IPv6 Load server takes precedence. Indicates the IP address and port of the remote logging machine to which the phone sends log messages. These log messages help in debugging the peer to peer image distribution feature. Use Cisco Unified Communications Manager Administration to modify. Note The remote logging setting does not affect the sharing log messages sent to the phone log. Related Topics • Displaying a Configuration Menu, page 4-2 • Network Configuration Menu, page 4-5 OL-21011-01 Cisco Unified IP Phone Administration Guide for Cisco Unified Communications Manager 8.0 (SCCP and SIP) 4-37