Cisco CP-7961G-GE Administration Guide - Page 96
NTP Configuration Menu for SIP Phones, System > Phone NTP, Reference
View all Cisco CP-7961G-GE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 96 highlights
Device Configuration Menu Chapter 4 Configuring Settings on the Cisco Unified IP Phone Table 4-12 Locale Configuration Menu Options (continued) Option Network Locale Version NTP Configuration (SIP phones only) Description Version of the network locale loaded on the phone. Menu to view information on NTP server and mode configuration. For more information, see NTP Configuration Menu for SIP Phones, page 4-24. To Change Display only-cannot configure. From Cisco Unified Communications Manager Administration, choose System > Phone NTP Reference. NTP Configuration Menu for SIP Phones The NTP Configuration menu displays information about the NTP server and mode configuration used by SIP phones. Table 4-13 describes the options on this menu. Table 4-13 NTP Configuration Menu Options Option NTP IP Address 1 NTP IP Address 2 NTP Mode 1 NTP Mode 2 Description To Change IP address of the primary NTP server. From Cisco Unified Communications Manager Administration, choose System > Phone NTP Reference. IP address of the secondary or backup NTP server. From Cisco Unified Communications Manager Administration, choose System > Phone NTP Reference. Primary server mode. Supported modes are From Cisco Unified Communications Manager Directed Broadcast, Unicast, Multicast, Any cast. Administration, choose System > Phone NTP Reference. Secondary server mode. Supported modes are From Cisco Unified Communications Manager Directed Broadcast, Unicast, Multicast, Any cast. Administration, choose System > Phone NTP Reference. 4-24 Cisco Unified IP Phone Administration Guide for Cisco Unified Communications Manager 8.0 (SCCP and SIP) OL-21011-01