Dell 1350cnw Color Laser Printer User's Guide - Page 132

*1 Enter 5 in Sleep to put the printer in the Sleep mode five minutes after it finishes a job. This uses less energy, but requires more warm-up time for the printer. Enter 5 if your printer shares an electrical circuit with room lighting and you notice lights flickering. Select a high value if your printer is in constant use. In most circumstances, this keeps the printer ready to operate with minimum warm-up time. Select a value between 5 and 30 minutes for the Sleep mode if you want a balance between energy consumption and a shorter warm-up period. The printer automatically returns to the standby mode from the Sleep mode when it receives data from the computer. You can also return the printer to the standby mode by pressing any button on the operator panel. *2 The default for mm/inch and Default Paper Size vary depending on country-specific factory default. USB Settings Purpose: To change the USB settings on your printer. Values: USB Port To enable the USB interface on your printer. Secure Settings Panel Lock Purpose: To restrict access to Admin Menu and Report/List with a password, and to set or change the password. Values: Panel Lock Set New Password Re-enter Password Restricts access to Admin Menu and Report/List with a password. Sets a password required to access Admin Menu and Report/ List. Enter the new password again to confirm. 128 Dell Printer Configuration Web Tool