Dell 1350cnw Color Laser Printer User's Guide - Page 293

Problem Action Print media misfeeds or multiple feeds occur Ensure that the print media you are using meets the specifications for your printer. See "Supported Paper Sizes" on page 162 for more information. Fan the print media before loading it. Ensure that the print media is loaded correctly. Do not overfill the print media sources. Do not force print media into the Priority Sheet Inserter (PSI) or the Multipurpose Feeder (MPF) when you load it. Otherwise, it may skew or buckle. Ensure that the print media is not curled. Load the recommended print side correctly for the type of print media you are using. See "Loading Print Media" on page 165 for more information. Turn the print media over or around and try printing again to see if feeding improves. Do not mix print media types. Do not mix reams of print media. Remove the top and bottom curled sheets of a ream before loading the print media. Load a print media source only when it is empty. The envelope is creased after Ensure that the envelope is loaded as instructed in printing. "Loading Print Media in the Multipurpose Feeder (MPF)" on page 166 or "Loading Print Media in the Priority Sheet Inserter (PSI)" on page 173. Page breaks in unexpected places. Increase the setting for Time-Out in the Printer Settings menu in the Dell Printer Configuration Web Tool. Job prints from the wrong Check the Paper Type on the printer operator source or on the wrong print panel and in the printer driver. media. Print media does not stack Turn the print media stack over in the PSI and MPF. neatly in the output bin. Troubleshooting 289