Dell 1350cnw Color Laser Printer User's Guide - Page 205

Printer Maintenance The Printer Maintenance tab contains the System Settings, Paper Density, Adjust BTR, Adjust Fuser, Color Registration Adjustment, Adjust Altitude, Reset Defaults, Non-Dell Toner, BTR Refresh Mode, TCP/IP Settings, and Network Settings pages. NOTE: Values marked by an asterisk (*) are the factory default menu settings. System Settings Purpose: To configure the power saving mode, time-out time, job log auto print, mm/ inch setting, operator panel language setting, default paper size setting, and low toner alert message setting. Values: Sleep*1 Deep Sleep 5 minutes* 5-30 minutes 6 minutes* 1-6 minutes Fault Time-Out 0: Off 60 seconds* 3-300 seconds Job Time-Out 0: Off 30 seconds* 5-300 seconds Specifies the time taken by the printer before it enters Sleep mode after it finishes a job. Specifies the time taken by the printer before it enters Deep Sleep mode after it goes into Sleep mode. Disables the fault time-out. Specifies the time taken by the printer before it cancels jobs that stop abnormally. The print job is cancelled if it times out. Disables the job time-out. Specifies the amount of time that the printer waits for data to arrive from the computer. The print job is cancelled if it times out. Understanding the Tool Box Menus 201