Dell 1350cnw Color Laser Printer User's Guide - Page 155

Initialize NIC NVRAM Memory and restart printer. Restart Printer Click the Start button to initialize NVM. Network settings will revert to the factory default settings and reboot the network capability. Click the Start button to reboot the printer. Security The Security tab contains the Set Password and IP Filter (IPv4) pages. Set Password Purpose: To set or change the password that is required to access the setup parameters of the printer from the Dell Printer Configuration Web Tool. This page can also be displayed by clicking Set Password in the left frame. Values: Administrator Password Re-enter Administrator Password Access denial by the authentication failure of the Administrator Sets the password using up to 10 alphanumeric characters. The password will appear as asterisks (*) in the field when it is entered. Enter the password again to confirm. Sets the maximum number that the administrator fails to log in. If you set 0, this feature is disabled. The failed attempts counter is reset to 0 by a successful authentication. Every administrator authentication is rejected if the counter exceeds the maximum number of failed login attempts. NOTE: If you forgot your password, initialize NVM (non-volatile memory) to restore the password to the default (NULL). See "Reset Print Server" on page 150. NOTE: When you change the password to lock the operator panel, set the password from Panel Lock Set in the Printer Settings. Dell Printer Configuration Web Tool 151