Dell 1350cnw Color Laser Printer User's Guide - Page 152
Notification 1, Trap Address, Port Number, Notify, Authenticate Error Trap, Maximum Number of Device
View all Dell 1350cnw Color Laser Printer manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 152 highlights
Trap Trap Address Notification 1- Type 4 Select the trap address type from the list. Selecting Off clears the settings in Trap Address, Port Number, and Notify, and does not notify trap occurrence. Selecting IPv4 or IPv6 allows you to enter Trap Address. Trap Address Specifies the IP address and IP socket in the following format: • IPv4 Specifies the IP address and IP socket in the nnn.nnn.nnn.nnn:mmmmm format. Each section of "nnn" is a variable value between 0 and 255. Note that values 127 and 224-254 are not valid for the first three-digits only. IP socket mmmmm is a variable value between 0 and 65535. • IPv6 Specifies the IP address and IP socket in the xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:mmm mm format. Each section of "xxxx" is a hexadecimal variable value between 0 and ffff. IP socket mmmmm is a variable value between 0 and 65535. Port Number Enter the SNMP trap destination port number. Notify Specifies whether to notify trap occurrence. Authenticate Error Trap Specifies whether to notify Authenticate Error Trap. *1 The default value can be changed by using Dell Printer Configuration Web Tool. LLTD Purpose: To specify the maximum number of devices. Values: Maximum Number of Device Sets the maximum number of device from 64 to 1024. 148 Dell Printer Configuration Web Tool