Dell B2360DN Mono Laser User Guide - Page 67
Wireless menu, AppleTalk menu, Network/Ports, Network [x], Network [x] Setup, Wireless
View all Dell B2360DN Mono Laser manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
Understanding the printer menus 67 Use To Set Hostname* Set the host name. Note: The host name is limited to 15 characters, and accepts US‑ASCII, alphanumeric characters and hyphen only. View Address* View the current IPv6 addresses. View Router Address* View the current router address. Enable DHCPv6 On Off Enable DHCPv6 in the printer. Note: On is the factory default setting. * These settings can be changed only from the Embedded Web Server. Wireless menu Note: This menu is available only in printers connected to a wireless network or printer models that have a wireless network adapter. To access the menu, navigate to any of the following: • Network/Ports > Network [x] > Network [x] Setup > Wireless Use Network Mode Infrastructure Ad hoc To Specify the network mode. Notes: • Ad hoc is the factory default setting. This configures wireless connection directly between the printer and a computer. • Infrastructure lets the printer access a network using an access point. Compatibility 802.11b/g 802.11b/g/n Specify the wireless standard for the wireless network. Note: The 802.11b/g/n is the factory default setting. Choose Network View Signal Quality View Security Mode Select an available network for the printer to use. View the quality of the wireless connection. View the encryption method for the wireless network. AppleTalk menu Note: This menu is available only in printer models connected to a wired network or when an optional network card is installed. To access the menu, navigate to any of the following: • Network/Ports > Standard Network > Standard Network Setup > AppleTalk • Network/Ports > Network Setup [x] > AppleTalk