Dell PowerConnect 6248 Configuration Guide - Page 123
Client, DOT 1x/MAB, RADIUS, Example 1: Enable/Disable MAB
View all Dell PowerConnect 6248 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 123 highlights
Client DOT 1x/MAB RADIUS Traffic from unknown client, Learn MAC EAPOL Request (Identity) D=01.80.c2.00.00.03 EAPOL Request (Identity) D=01.80.c2.00.00.03 (30 seconds) EAPOL Request (Identity) D=01.80.c2.00.00.03 (30 seconds) EAPOL Timeout - Initiate MAB (30 seconds) Client Authentication RADIUS Access-Request RADIUS Access-Accept Figure 5-5. MAB Operation - Authentications Based on MAC Address in Database CLI Examples Example 1: Enable/Disable MAB To enable/disable MAB on interface 1/5, use the following commands: console(config-if-1/g5)#dot1x mac-auth-bypass console(config-if-1/g5)#no dot1x mac-auth-bypass Device Security 123
Device Security
123
Figure 5-5.
MAB Operation – Authentications Based on MAC Address in Database
CLI Examples
Example 1: Enable/Disable MAB
To enable/disable MAB on interface 1/5, use the following commands:
console(config-if-1/g5)#dot1x mac-auth-bypass
console(config-if-1/g5)#no dot1x mac-auth-bypass
Client
DOT 1x/MAB
RADIUS
Traffic from unknown client, Learn MAC
EAPOL Timeout – Initiate MAB (30 seconds)
EAPOL Request (Identity)
D=01.80.c2.00.00.03 (30 seconds)
RADIUS Access-Accept
RADIUS Access-Request
Client Authentication
EAPOL Request (Identity)
D=01.80.c2.00.00.03 (30 seconds)
EAPOL Request (Identity)
D=01.80.c2.00.00.03