Dell PowerConnect 6248 Configuration Guide - Page 36
CLI Example, Example #1: Configuring a Protected Port, Example #2: Viewing Protected Port Group 1
View all Dell PowerConnect 6248 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
CLI Example Example #1: Configuring a Protected Port The commands in this example name the protected port group 1 "PP_Test" and assign ports 1 and 2 to the group. console(config)#switchport protected 1 name PP_Test console(config)#interface ethernet 1/g17 console(config-if-1/g17)#switchport protected 1 console(config-if-1/g17)#exit console(config)#interface ethernet 1/g18 console(config-if-1/g18)#switchport protected 1 console(config-if-1/g18)#exit console(config)#exit Example #2: Viewing Protected Port Group 1 console#show switchport protected 1 Name PP_Test" 1/g17, 1/g18 36 Switching Configuration
36
Switching Configuration
CLI Example
Example #1: Configuring a Protected Port
The commands in this example name the protected port group 1 “PP_Test” and assign ports 1 and 2 to
the group.
console(config)#switchport protected 1 name PP_Test
console(config)#interface ethernet 1/g17
console(config-if-1/g17)#switchport protected 1
console(config-if-1/g17)#exit
console(config)#interface ethernet 1/g18
console(config-if-1/g18)#switchport protected 1
console(config-if-1/g18)#exit
console(config)#exit
Example #2: Viewing Protected Port Group 1
console#show switchport protected 1
Name
.........................................
"PP_Test"
1/g17, 1/g18