Dell PowerConnect 6248 Configuration Guide - Page 24
Example #2: Set Multicast Storm Control for an Interface
View all Dell PowerConnect 6248 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Example #1: Set Broadcast Storm Control for an Interface console#configure console(config)#interface ethernet 1/g17 console(config-if-1/g17)#storm-control broadcast ? level Press enter to execute the command. Configure storm-control thresholds. console(config-if-1/g17)#storm-control broadcast level ? Enter the storm-control threshold as percent of port speed. Percent of port speed is converted to PacketsPerSecond based on 512 byte average packet size and applied to HW. Refer to documentation for further details. console(config-if-1/g17)#storm-control broadcast level 7 Example #2: Set Multicast Storm Control for an Interface console(config-if-1/g17)#storm-control multicast level 8 Example #3: Set Unicast Storm Control for an Interface console(config-if-1/g17)#storm-control unicast level 5 24 System Configuration