Dell PowerConnect 6248 Configuration Guide - Page 41
Create VLAN 100., Con port 1/g5 as a member of VLAN 100.
View all Dell PowerConnect 6248 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
1. Create VLAN 100. console#configure console(config)#vlan database console(config-vlan)#vlan 100 2. Enable IGMP snooping on the VLAN. console(config-vlan)#ip igmp snooping 100 console(config-vlan)#exit 3. Forbid the forwarding of unregistered multicast addresses on VLAN 100 to prevent multicast flooding to ports if there are no "listeners." console(config)#interface vlan 100 console(config-if-vlan100)#bridge multicast forbidden forward-unregistered console(config-if-vlan100)#exit 4. Globally enable IGMP on the switch. console(config)#ip igmp snooping 5. Configure port 1/g5 as a member of VLAN 100. console(config)#interface ethernet 1/g5 console(config-if-1/g5)#switchport access vlan 100 console(config-if-1/g5)#exit 6. Configure port 1/g10 as a member of VLAN 100. console(config)#interface ethernet 1/g10 console(config-if-1/g10)#switchport access vlan 100 console(config-if-1/g10)#exit 7. Configure port 1/g15 as a member of VLAN 100. console(config)#interface ethernet 1/g15 console(config-if-1/g15)#switchport access vlan 100 console(config-if-1/g15)#exit 8. Configure port 1/g20 as a member of VLAN 100. console(config)#interface ethernet 1/g20 console(config-if-1/g20)#switchport access vlan 100 console(config-if-1/g20)#exit Switching Configuration 41