Dell PowerConnect 6248 Configuration Guide - Page 18
CLI Examples, The following are examples of the commands used in the SNTP feature.
View all Dell PowerConnect 6248 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
CLI Examples The following are examples of the commands used in the SNTP feature. Example #1: Viewing SNTP Options (Dell PC62XX Routing)(Config) #sntp ? console(config)#sntp ? authenticate authentication-key broadcast client server trusted-key unicast Require authentication for received Network Time Protocol (NTP) traffic from servers. Define an authentication key for Simple Network Time Protocol (SNTP). Configure SNTP client broadcast parameters. Configure the SNTP client parameters. Configure SNTP server parameters. Authenticate the identity of a system to which SNTP will synchronize. Configure SNTP client unicast parameters. Example #2: Configuring the SNTP Server console(config)#sntp server ? Enter SNTP server address or the domain name. console(config)#sntp server 192.168.10.25 ? key poll priority Authentication key to use when sending packets to this peer. Enable/Disable SNTP server polling. Configure SNTP server priority. Press enter to execute the command. console(config)#sntp server 192.168.10.25 18 System Configuration