Dell PowerConnect 6248 Configuration Guide - Page 79
Using the Web Interface to Con VRRP, Routing > VRRP > Virtual Router Configuration.
View all Dell PowerConnect 6248 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
4 Assign virtual router ID to the interface that will participate in the protocol: console(config)#interface vlan 50 console(config-if-vlan50)#ip vrrp 20 5 Specify the IP address that the virtual router function will recognize. console(config-if-vlan50)#ip vrrp 20 ip 192.150.2.1 6 Set the priority for the interface. Assigning a lower priority value than the interface on the other router ensures that this interface the backup. console(config-if-vlan50)#ip vrrp 20 priority 250 7 Start the virtual router on the interface. console(config-if-vlan50)#ip vrrp 20 mode console(config-if-vlan50)#exit Using the Web Interface to Configure VRRP Use the following screens to perform the same configuration using the Graphical User Interface: • Routing > IP > Configuration. To enable routing for the switch. • Routing > IP > Interface Configuration. To enable routing for the VLAN interfaces and configure their IP addresses and subnet masks. • Routing > VRRP > VRRP Configuration. To enable VRRP for the switch • Routing > VRRP > Virtual Router Configuration. To configure the interface for VRRP. Routing Configuration 79