Dell PowerConnect 6248 Configuration Guide - Page 159
Multicast Route Table Summary, IGMP Router-Alert check
View all Dell PowerConnect 6248 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 159 highlights
console#show ip igmp IGMP Admin Mode Enabled IGMP Router-Alert check Disabled IGMP INTERFACE STATUS Interface Interface-Mode Operational-Status vlan 100 Enabled Operational vlan 200 Enabled Operational The host connected to interface 1/g5 sends an IGMP join message for multicast group 225.1.1.1 in VLAN 100. Then, the host connected to 1/g15 sends multicast data for group 225.1.1.1 in VLAN 200. Interface 1/g5 sends and receives the multicast data from the host on interface 1/g15. The multicast traffic must be routed because the hosts on 1/g5 and 1/g15 are in different subnets. Due to IGMP snooping, interface 1/g10 does not send or receive any multicast data even though it is in the same broadcast domain as interface 1/g5. console#show bridge multicast address-table Vlan MAC Address Type Ports 100 0100.5E01.0101 Dynamic 1/g5 Vlan ---100 Forbidden ports for multicast addresses: MAC Address Ports 0100.5E01.0101 console#show ip mcast mroute summary Multicast Route Table Summary Incoming Outgoing Source IP Group IP Protocol Interface Interface List 20.20.20.20 225.1.1.1 PIMDM vlan 200 vlan 100 Multicast 159