Dell PowerConnect 6248 Configuration Guide - Page 32
Example #3: Assign Ports to VLAN3, Example #4: Assign VLAN3 as the Default VLAN
View all Dell PowerConnect 6248 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
Example #3: Assign Ports to VLAN3 This example shows how to assign the ports that will belong to VLAN 3. Untagged frames will be accepted on ports 1/g19 and 1/g20. Note that port 1/g18 belongs to both VLANs and that port 1/g17 can never belong to VLAN 3. console(config)#interface ethernet 1/g18 cconsole(config-if-1/g18)#switchport general allowed vlan add 3 console(config-if-1/g18)#exit console(config)#interface ethernet 1/g19 console(config-if-1/g19)#switchport general allowed vlan add 3 console(config-if-1/g19)#exit console(config)#interface ethernet 1/g20 console(config-if-1/g20)#switchport general allowed vlan add 3 Example #4: Assign VLAN3 as the Default VLAN This example shows how to assign VLAN 3 as the default VLAN for port 1/g18. console(config)#interface ethernet 1/g18 console(config-if-1/g18)#switchport general pvid 3 Example #5: Assign IP Addresses to VLAN 2 In order for the VLAN to function as a routing interface, you must enable routing on the VLAN and on the switch. Routing is only permitted on VLAN interfaces. Routing on physical interfaces is not supported. console#configure console(config)#interface vlan 2 console(config-if-vlan2)#ip address 192.168.10.33 255.255.255.0 console(config-if-vlan2)#routing console(config-if-vlan2)#exit console(config)#ip routing 32 Switching Configuration