Dell PowerConnect 6248 Configuration Guide - Page 22
Port Description, CLI Example
View all Dell PowerConnect 6248 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
alert critical debug emergency error info notice warning Immediate action needed Critical conditions Debugging messages System is unusable Error conditions Informational messages Normal but significant conditions Warning conditions console(Config-logging)#level critical Port Description The Port Description feature lets you specify an alphanumeric interface identifier that can be used for SNMP network management. CLI Example Use the commands shown below for the Port Description feature. Example #1: Enter a Description for a Port This example specifies the name "Test" for port 1/g17: console#configure console(config)#interface ethernet 1/g17 console(config-if-1/g17)#description Test console(config-if-1/g17)#exit console(config)#exit Example #2: Show the Port Description console#show interfaces description ethernet 1/g17 Port Description 1/g17 Test 22 System Configuration