Dell PowerConnect 6248 Configuration Guide - Page 52
Link Layer Discovery Protocol, CLI Examples, Example #1: Set Global LLDP Parameters
View all Dell PowerConnect 6248 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
Link Layer Discovery Protocol The Link Layer Discovery Protocol (LLDP) feature allows individual interfaces on the switch to advertise major capabilities and physical descriptions. Network managers can view this information and identify system topology and detect bad configurations on the LAN. LLDP has separately configurable transmit and receive functions. Interfaces can transmit and receive LLDP information. CLI Examples Example #1: Set Global LLDP Parameters Use the following sequence to specify switch-wide notification interval and timers for all LLDP interfaces. console(config)#lldp ? notification-interval send remote data Configure minimum interval to change notifications. timers timer values. Configure the LLDP global console(config)#lldp notification-interval 1000 console(config)#lldp timers hold 8 reinit 5 console(config)#exit Example #2: Set Interface LLDP Parameters The following commands configure the Ethernet interface 1/g10 to transmit and receive LLDP information. console#configure console(config)#interface ethernet 1/g10 console(config-if-1/g10)#lldp receive console(config-if-1/g10)#lldp transmit console(config-if-1/g10)#lldp transmit-mgmt console(config-if-1/g10)#exit console(config)#exit 52 Switching Configuration