Dell PowerConnect 6248 Configuration Guide - Page 153
manage group membership information for its directly-connected hosts IGMP may not be required
View all Dell PowerConnect 6248 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 153 highlights
CLI Example The following example configures two DVMRP interfaces. First, this example configures an OSPF router1 and globally enables IP routing and IP multicast. IGMP is globally enabled so that this router can manage group membership information for its directly-connected hosts (IGMP may not be required when there are no directly connected hosts). Next, DVMRP is globally enabled. Finally, DVMRP, IGMP, and OSPF are enabled on several interfaces. console#configure router ospf router-id 3.3.1.1 exit ip routing ip multicast ip igmp ip dvmrp interface vlan 15 routing ip address 3.3.3.1 255.255.255.0 ip dvmrp ip igmp ip ospf area 0 exit interface vlan 30 routing ip address 1.1.1.1 255.255.255.0 ip dvmrp ip igmp ip ospf area 0 exit exit 1. OSPF configuration is added as a unicast protocol for illustration purposes; static unicast routing could also be configured. Multicast 153