Epson FX 1170 User Manual - Page 137
Single Return Signal, Direction Description - reset
View all Epson FX 1170 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 137 highlights
Single Return Signal Pin Pin 11 29 BUSY 12 30 PE 13 - SLCT Direction Description OUT A HIGH signal indicates that the printer cannot receive data. The signal goes HIGH in the following cases: 1) During data entry 2) During input buffer full 3) During printer-error status OUT A HIGH signal indicates that the printer is out of paper. OUT Pulled up to 5V through 3.3 kR Twisted-pair return signal ground level 16 INIT IN When this level becomes LOW, the printer controller is reset to its power-up state and the print buffer is cleared. This level is normally HIGH; its pulse width must be more than 50 microseconds at the receiving terminal. 32 - -__ ERROR OUT This level becomes LOW when the printer is: 1) in a paper-out status 2) in an error status 7-12 Technical Specifications