Epson FX 1170 User Manual - Page 69
Changing Group 2 Default Settings, CONDENSED, PAUSE, READY
View all Epson FX 1170 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
Default-Setting Mode 4. The FONT and CONDENSED lights show which feature you have selected to change by turning on, off, or blinking. Press the FONT button as many times as necessary until the FONT and CONDENSED lights match your selection. For example, if you want to change the character spacing, press the FONT button until the FONT light is off and the CONDENSED light is blinking. 5. Next, press the PAUSE button to change the setting. The READY light shows your selection. For example, if you want to change to 12 cpi, press the PAUSE button once to turn the READY light on. 6. If necessary, repeat this process for any other Group 1 features you want to change. 7. Exit the Group 1 default-setting mode at any time by turning off the printer. Any changes you have made remain in effect until you change them again. Note: If you want to check the new default settings, enter the default-setting mode again and print the quick reference. After that, turn off the printer to exit the default-setting mode. Changing Group 2 default settings 1. Make sure the printer is turned off. 2. Turn on the printer while you hold down the FONT and PAUSE buttons. This enters the Group 2 default-setting mode. The printer beeps once. 3-10 Using the Printer