Epson FX 1170 User Manual - Page 48

Removing Paper From the Rear Push Tractor, Paper

Get Epson FX 1170 - B/W Dot-matrix Printer PDF manuals and user guides View all Epson FX 1170 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 48 highlights

Using Continuous Paper 6. Close the sprocket covers. 7. Adjust the right sprocket to remove any slack in the paper; then lock it in place. 8. Attach the paper guide in its flat position over the printer. Slide the edge guides to the center. 9. Turn on the printer. When the printer receives data, it loads the paper automatically before printing. Note: You can also advance the paper to the loading position by pressing the PAPER FEED button. 0ta CAUTION: Always turn off the printer before you use the knob on its left side to clear paper jams. If the printer is on, you may damage it or lose the top-of-form position. Removing paper from the rear push tractor 1. To remove continuous paper, press the TEAR OFF button to feed the paper's perforation to the tear-off edge of the printer cover. Note: If the page perforation does not meet the tear-off edge, you can adjust the tear-off position using the micro-feed feature. See Chapter 3. 2. Tear off the paper. 3. While holding down the ALT button, press the EJECT button to feed the continuous paper backward out of the printer and into the paper-park position. CAUTION: Make sure you tear off your printed document before holding down the ALT button and Paper Handling 2-15

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
Using Continuous Paper
6.
Close the sprocket covers.
7.
Adjust the right sprocket to remove any slack in the paper; then
lock it in place.
8.
Attach the paper guide in its flat position over the printer. Slide
the edge guides to the center.
9.
Turn on the printer. When the printer receives data, it loads the
paper automatically before printing.
Note:
You can also advance the paper to the loading position by
pressing the
PAPER FEED
button.
0
t
CAUTION:
Always turn off the printer before you use the
a
knob on its left side to clear paper jams. If the printer is on,
you may damage it or lose the top-of-form position.
Removing paper from the rear push tractor
1.
To remove continuous paper, press the
TEAR OFF
button to feed
the paper’s perforation to the tear-off edge of the printer cover.
Note:
If the page perforation does not meet the tear-off edge, you
can adjust the tear-off position using the micro-feed feature. See
Chapter 3.
2.
Tear off the paper.
3.
While holding down the
ALT
button, press the
EJECT
button to
feed the continuous paper backward out of the printer and into
the paper-park position.
CAUTION:
Make sure you tear off your printed
document before holding down the
ALT
button and
Paper
Handling
2-15