Epson FX 1170 User Manual - Page 74
Micro-Feed, Adjusting the Print Position, PAUSE, CONDENSED
View all Epson FX 1170 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
Micro-Feed The micro-feed feature allows you to move the paper forward or backward in 2/216-inch increments. You use this feature to adjust the loading and tear-off positions, as well as the print position during a print job. When you make adjustments to the loading or tear-off positions for continuous paper, the printer remembers the new setting even if you turn off the printer. The printer automatically advances the paper to the new position when the power is turned on again. When you adjust the loading position for single-sheet paper, the printer remembers the new position only until you turn off the power. The loading position returns to the factory setting when the power is turned on again. Adjusting the print position Follow the steps below to adjust the print position during a print job: 1. Press the PAUSE button to stop printing. 2. While holding down the ALT button, press the PAUSE button to enter the micro-feed mode. The FONT and CONDENSED lights blink alternately. Using the Printer 3-15