Epson FX 1170 User Manual - Page 75
Adjusting the Loading Position, Using the Printer
View all Epson FX 1170 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
Micro-Feed 3. Press the PAUSE/TEAR OFF button to feed the paper forward or press the PAPER FEED button to feed the paper backward, as indicated by the arrows beside the buttons. 4. To leave the micro-feed mode, press the ALT button again. Then press the PAUSE button to continue printing. Adjusting the loading position The loading position is the position of the paper after it is automatically loaded by the printer. If your printing is too high or low on the page, you can change the loading position. 1. Make sure the printer is turned on. 2. Load either continuous or single-sheet paper. (Load continuous paper by pressing the PAPER FEED button.) 3. While holding down the ALT button, press the PAUSE button to enter the micro-feed mode. The FONT and CONDENSED lights blink alternately. 4. Press the PAUSE/TEAR OFF button to feed the paper forward or press the PAPER FEED button to feed the paper backward, as indicated by the arrows beside the buttons. 3-16 Using the Printer