Epson PowerLite 9300i User's Guide - Page 103
Replacing the Lamp
View all Epson PowerLite 9300i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 103 highlights
Replacing the Lamp The projection lamp lasts up to 7000 hours. (Lamp life results will vary depending upon environmental conditions and usage.) Turn the projector off when not in use. Continuous 24-hour-a-day use may reduce the overall life of this product. When the lamp nears the end of its life (as determined from projector usage), the message LAMP REPLACE appears on the screen and the lamp warning light flashes orange. To maintain projector brightness and image quality, replace the lamp as soon as possible. It is also time to replace the lamp when: ■ The projected image gets darker or starts to deteriorate. ■ The lamp warning light flashes red (the lamp is burnt out). Contact your dealer or call EPSON at (800) 873-7766 in the United States for a replacement lamp. Request part number V13H010L26. In Canada, please call (800) 463-7766 for dealer referral. Follow these steps to replace the lamp: 1. Turn off the projector. 2. When the power light stops flashing, unplug the power cord. 3. Let the projector cool for at least half an hour (if it has been on). The lamp is extremely hot immediately after use. 4. If the projector is mounted on the ceiling, remove the rear cover. note You can check how long the lamp has been in use (see page 105). warning Let the lamp cool fully before replacing it. In the unlikely event that the lamp has broken, small glass fragments may be present and should be removed carefully to avoid injury. Release tab to remove rear cover Maintaining the Projector 103