Epson PowerLite 9300i User's Guide - Page 109
Solving Problems, Status lights, flashing, Use this table to interpret the projector's status lights
View all Epson PowerLite 9300i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 109 highlights
Use this table to interpret the projector's status lights, then follow the instructions provided: Status lights = on = flashing = off Light Description and solution If no lights are on, make sure the power cord is connected securely both at the power outlet and the projector. If you have just replaced the lamp, make sure the cover is securely fastened. Orange When the power light is orange, the projector is in sleep mode. Press the Power button to turn it on. Green When the power light is flashing green, the projector is warming up. Wait for the image to appear. Green When the power light is green, the projector is operating normally. Orange When the power light is flashing orange, the projector is cooling down. Do not unplug it until the light stops flashing and remains orange. If you want to turn it back on, wait until the light stops flashing. Red Orange When the power and temperature lights are flashing, the projector is getting too hot, but you can continue running it in this condition. Verify that the air filter is not clogged. Clean or replace it as described on page 101. Make sure the room temperature is not above 95 °F (35 °C) and there is plenty of space around and under the projector for ventilation. Solving Problems 109