Epson WorkForce Pro GT-S80 User Manual - Page 22
Loading Cards
View all Epson WorkForce Pro GT-S80 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Slide the carrier sheet into the feeder until it meets resistance. Then slide the edge guides over to fit the edges of the carrier sheet. To start scanning, see Starting a Scan Using Epson Scan for instructions. Note: The carrier sheet should be replaced after every 500 scans* or if scratched or stained. (*Replacement timeline may vary depending on usage.) Top Loading Cards Note: Results are not guaranteed when scanning plastic cards with shiny surfaces, such as ID cards. Open and extend the input tray. Then, slide out and extend the output tray.
Slide the carrier sheet into the feeder until it meets resistance. Then slide the edge guides over to fit the edges of the carrier sheet.
To start scanning, see
Starting a Scan Using Epson Scan
for instructions.
Note:
The carrier sheet should be replaced after every 500 scans* or if scratched or stained. (*Replacement timeline may vary
depending on usage.)
Top
Loading Cards
Note:
Results are not guaranteed when scanning plastic cards with shiny surfaces, such as ID cards.
Open and extend the input tray. Then, slide out and extend the output tray.