GE E1250TW User Manual (English)

GE E1250TW Manual

GE E1250TW manual content summary:

  • GE E1250TW | User Manual (English) - Page 1
    User Manual E1250TW Digital Camera Preparations Basic operation Camera function controls Playback Using the Menus Camera connectivity Appendix En
  • GE E1250TW | User Manual (English) - Page 2
  • GE E1250TW | User Manual (English) - Page 3
    Tested To Comply With FCC Standards FOR HOME OR OFFICE USE FCC Statement This equipment has been tested and found to comply with limits for a Class B digital product. Declaration of Conformity Model Name: E1250TW Trade Name: GE Responsible Party: General Imaging Co. Address: 2158 W. 190th Street
  • GE E1250TW | User Manual (English) - Page 4
    small children. In cold locations, battery performance deteriorates and the time for which they can be used shortens markedly. Memory card notes: When using a new memory card, or a memory card has been initialized by a PC, be sure to format the card with your digital camera before using it. To edit
  • GE E1250TW | User Manual (English) - Page 5
    service the camera yourself. • Do not drop or knock the camera. Improper handling may damage the product. • Turn off the camera before inserting or removing the battery and memory card. • Use only the type of battery and charger that came with your camera. Using other types of batteries or chargers
  • GE E1250TW | User Manual (English) - Page 6
    with a slightly damp soft cloth. About this manual This manual provides you with instructions on how to use your GE digital camera. Every effort has been made to ensure that the contents of this manual are accurate, but General Imaging Company reserves the right to make changes without notice
  • GE E1250TW | User Manual (English) - Page 7
    About the LCD screen The LCD touch-screen (touch panel) can be used to operate the camera. When you turn the camera on, various icons are shown on the LCD screen to indicate the current camera settings and status. To learn more about the displayed icons, see LCD Screen Display on page 18. LCD
  • GE E1250TW | User Manual (English) - Page 8
    Trademarks 1 Safety information 1 About this manual 2 Symbols used in this manual 2 About the LCD screen 3 Contents 4 Getting ready 8 Unpacking 8 Identifying the components 9 Charging the battery 11 Inserting the battery 12  Inserting an optional SD/SDHC card 13 Turning on and off 15
  • GE E1250TW | User Manual (English) - Page 9
    Camera function controls 33 Shooting in Auto mode 33 Using the zoom function 33 Picture size setup 34 Flash mode 35 Macro mode 36 Face detection 37 Self-timer mode 38 EV exposure compensation 39 WB (White
  • GE E1250TW | User Manual (English) - Page 10
    zoom 59 Quick review 59 Print date 60 AF assist beam 60 Blink detection 61 B shutter (slow shutter 61 Movie recording setup 62 Image quality setup 62 The Expo Metering Setup 62 Playback menu setup 63 Protected 63 Delete 64 DPOF (Digital Print Order Format 66 Slide show 66 Camera
  • GE E1250TW | User Manual (English) - Page 11
    the USB mode 80 Connecting the camera and printer 81 Using the PictBridge menu 82 With/Without the picture date Printed........... 82 Print all index 83 Print the DPOF image 84 Disconnect the USB cable 84 Appendices 85 Specifications: E1250TW 85 Error messages 89 Troubleshooting 91
  • GE E1250TW | User Manual (English) - Page 12
    contain the camera model you purchased along with the following items. If anything is missing or appears to be damaged, please contact your vendor. User Manual User Manual Quick Start Guide CD-ROM Warranty Card Wrist Strap Rechargeable Lithiumion Battery  Battery Charger USB Cable AV Cable
  • GE E1250TW | User Manual (English) - Page 13
    Identifying the components Front View 1 2 3 4 Back View 5 6 Right View 
  • GE E1250TW | User Manual (English) - Page 14
    beam/Timer indicator 4 Lens 5 LCD screen 6 Wrist strap mount 7 Power indicator 8 Power button 9 Status LED 14 15 16 10 Playback button 11 Shutter button 12 Zoom scroll wheel 13 Speaker 14 Tripod mount point 15 HDMI port 16 Memory card/Battery compartment 17 USB/AV port
  • GE E1250TW | User Manual (English) - Page 15
    Charging the battery 1. Place the battery into the charger as shown. 2. Plug one end of the connecting cable into the charger base. 3. Plug the other end of the connecting cable into a wall outlet. Leave the battery to charge until the charger light goes green. (To maximize battery life, the first
  • GE E1250TW | User Manual (English) - Page 16
    Inserting the battery 1. Open the battery compartment. 2. Insert the battery while observing the correct polarity. Use the side of battery to press down the stopper as shown, allowing the battery to be inserted properly. 12
  • GE E1250TW | User Manual (English) - Page 17
    the right in lock position. Inserting an optional SD/SDHC card 1. Open the battery compartment. Battery capacity decreases with usage. Optional SD/SDHC cards are not included. The use of 64MB to 8GB memory cards from recognized manufacturers such as SanDisk, Panasonic and Toshiba is recommended
  • GE E1250TW | User Manual (English) - Page 18
    2. Insert an optional SD/SDHC card into the memory card slot as shown. 3. Close the battery compartment. To remove the SD/SDHC card, open the battery compartment and gently push the card to release it. Pull the card carefully. 14
  • GE E1250TW | User Manual (English) - Page 19
    first time, it is automatically set to the Auto shooting mode. You can change to other modes in the camera setup. Please see Camera Function Controls on page 29 for more details. The camera will power on in the last shooting mode that it was set to when it was powered off. 15
  • GE E1250TW | User Manual (English) - Page 20
    to operate the touch panel. • Please do not use excessive force on the LCD touch panel. Time and language setup Before you start using the camera, the language and time must be configured from the Setup menu. To access the Setup menu: 1. Press the power button to turn on the
  • GE E1250TW | User Manual (English) - Page 21
    set, press the button to confirm and save. Language setup: 1. Select Language from the camera setup menu page. 2. Press up/down arrow key in each page to find your language. 3. Press the button with the language you want to set for the camera, then press the button to confirm and save. 17
  • GE E1250TW | User Manual (English) - Page 22
    LCD Screen display Still Shooting mode display Mode icon: 12 3 4 5 20 Smile Detection 19 18 6 17 16 7 15 14 13 12 11 10 9 8 18 21 22 23 24
  • GE E1250TW | User Manual (English) - Page 23
    1 Shooting mode icon Auto mode Panorama stitching mode Stabilization mode Manual mode Scene mode Auto Scene mode 2 Memory card / internal memory display 3 Number of remaining shots 4 Zoom indicator 5 Battery level indicator 6 Macro mode display Macro mode off Macro mode on 7 Flash mode display
  • GE E1250TW | User Manual (English) - Page 24
    24 Color effect display (only available under Manual mode) 20 Movie mode on-screen icons: Mode icon: 123 45 14 6 13 12 11 1100 910 8 7 1 Shooting mode icon 2 Memory card / internal memory display 3 Remaining recording time 4 Zoom indicator 5 Battery level indicator 6 Macro mode indicator
  • GE E1250TW | User Manual (English) - Page 25
    Recording For best results the use of an SD memory card is recommended when shooting a movie. The camera's built-in memory is limited and may cause stuttering and noise if used for movie recording. While recording, the optical zoom is fixed but the digital zoom can go up to the maximum 4.5x. 21
  • GE E1250TW | User Manual (English) - Page 26
    Playback mode on-screen icons: 1 2 34 13 12 11 16 10 9 8 7 6 5 22 14 15
  • GE E1250TW | User Manual (English) - Page 27
    13 File protection 17 14 Audio playback display 15 Change picture size 16 Crop picture 17 Date and time captured 1 Slideshow mode 2 Memory card / built-in memory display 3 Current picture index / total number 4 File name 5 Screen display DISP (Please refer to Screen Display section on page 25
  • GE E1250TW | User Manual (English) - Page 28
    Screen Display Touch the icon at the bottom right corner to change the display contents on the screen: 1. Shooting mode When in shooting mode, touch the to change between the four on-screen displays: Hide Grid Show Grid 2. Recording mode When in shooting mode, touch the to change between the two
  • GE E1250TW | User Manual (English) - Page 29
    3. Scene mode When in Scene mode, the icon at the bottom right is displayed as the scene selection icon: 4. Playback mode When in playback mode, touch the to change between the two on-screen displays: Open Advanced Functions Hide Icon For relevant settings about scene selection, refer to Scene
  • GE E1250TW | User Manual (English) - Page 30
    to take pictures 1. 3. Hold the camera firmly. 2. W T Press the shutter button halfway to focus on the center of the viewing object, then completely depress the shutter button to capture the image. 4. The captured image is shown on the LCD screen. Use the Zoom Wheel to zoom in or out on the
  • GE E1250TW | User Manual (English) - Page 31
    focus frame at the center of the screen will be shown. If Auto Focus was achieved but the image is still blurry, "camera shake" may be the cause. Cause of camera shake: Shaking of the hand or arm while pressing the shutter button will result in a blurry image. How to reduce blur
  • GE E1250TW | User Manual (English) - Page 32
    of an object in motion. • Use higher ISO with faster shutter speeds (only available for Manual mode), and press the shutter button before the object starts to move. How to playback images The camera provides a hotkey to quickly playback the images you've captured. To view captured images and
  • GE E1250TW | User Manual (English) - Page 33
    2. Touch and slide left or right on the touch screen to view images or movies stored on the memory card or built-in memory. 3. When a movie has been taken, the icon will appear on the bottom center of the touch screen. Press the play button to start playback of
  • GE E1250TW | User Manual (English) - Page 34
    Adjust movie playback time: 1. When playing a movie, you can adjust the movie playback time by touching or . 2. You can also touch and slide the playback bar to adjust the playback time. Adjust playback volume: 1. During movie playback, touch the button and use the buttons to adjust playback
  • GE E1250TW | User Manual (English) - Page 35
    How to delete images In Playback mode, touch and hold the button until the delete button appears. Touch the button to access the Delete menu; you can delete images by using Delete pictures or movies or Specific delete. Delete movie Delete sound/recording files only Delete pictures or movies: 1.
  • GE E1250TW | User Manual (English) - Page 36
    the picture is currently protected and the buttons in the delete option menu cannot be selected. For Protection Setting on files, please refer to the instructions at page 63. 4. You can return to the previous page of the main menu by touching the Return button on the upper right hand corner
  • GE E1250TW | User Manual (English) - Page 37
    the image. Using the Zoom function Your camera is equipped with two types of zoom: optical zoom and digital zoom. Use the zoom scroll wheel at the top of the camera to zoom in or out on your subject while taking pictures. W T Zoom indication scale (please refer to digital zoom on page 59) When
  • GE E1250TW | User Manual (English) - Page 38
    larger the number of recorded pixels the better the image quality. The smaller the number of recorded pixels the more pictures you can store on a memory card. 3. Touch the button to confirm. 34
  • GE E1250TW | User Manual (English) - Page 39
    the flash based on lighting conditions. • Red-eye reduction The camera will pre-flash to reduce Red-eye. • Forced flash The camera will enable flash under all conditions. • Red-eye Reduction + Slow Synchro flash The camera will use the Slow Synchro flash and Red-eye reduction function
  • GE E1250TW | User Manual (English) - Page 40
    • Slow Synchro flash Macro mode The camera will use background expo metering as basis for accurate foreground and In Macro mode, you can capture more details of an • Macro mode off. button on screen to • Macro mode on Use this option to focus on objects within 5cm of the camera lens. 36
  • GE E1250TW | User Manual (English) - Page 41
    subject's face and optimize exposure. When Smile Detection is enabled, the camera will automatically take the picture when the subject smiles. 1. In Shooting a smile has been detected, the shutter will automically release until the memory card is filled or any key is pressed. For best result, the
  • GE E1250TW | User Manual (English) - Page 42
    Self-timer mode To use self portrait timer: 1. In Shooting mode, Touch the button at the bottom right of the screen until the self-portrait button appears. • 2 second timer A single picture will be shot 2 seconds after the shutter is pressed. • 10 second timer A single picture will be shot 10
  • GE E1250TW | User Manual (English) - Page 43
    EV exposure compensation Exposure compensation can adjust the exposure value for best picture results. To change the exposure value: 1. In Shooting mode, Touch the button at the bottom right of the screen until the EV icon appears. The text onscreen shows the current value when touching the minus
  • GE E1250TW | User Manual (English) - Page 44
    Balance) The white balance allows the user to adjust the color temperature under different light sources to ensure accurate color reproduction. (The WB setting is only available when the camera is in the Manual mode). To set the white balance: 1. In manual shooting mode, touch the button at the
  • GE E1250TW | User Manual (English) - Page 45
    the other hand, a lower ISO value is needed when in bright conditions. (The ISO setting is only available when the camera is in the Manual mode). To set the ISO value: 1. In manual shooting mode, touch the button at the bottom right of the screen and then page down. The ISO button will
  • GE E1250TW | User Manual (English) - Page 46
    . You can try different color combinations to change the mood of the picture. (The color values can be changed only under manual mode). To set up the color effect: 1. In manual shooting mode, touch the button at the bottom right of the screen and then page down. The color effect icon will
  • GE E1250TW | User Manual (English) - Page 47
    different conditions are detected intelligently and the most suitable settings will be automatically selected. 2. Hold the camera steady and aim at the subject. At this time, the camera will automatically choose the appropriate mode to suit the lighting conditions of the scene you are photographing
  • GE E1250TW | User Manual (English) - Page 48
    ISO value to compensate for low light. Macro Mode To capture object detail for close-ups, ASCN will automatically adjust the focus. Auto Mode The camera automatically adjusts the exposure and focus to ensure good pictures. 44
  • GE E1250TW | User Manual (English) - Page 49
    Scene mode In Scene mode, you can select from a total of 13 scene types to match your needs. Just select the right scene for the occasion and the camera will automatically adjust to the optimal settings. 1. Touch the mode button in the upper left corner of the screen. Touch button and then press
  • GE E1250TW | User Manual (English) - Page 50
    -moving objects. Bring action pictures to life. Indoor For indoors shots. Clearly show background and atmosphere. Snow Suitable for snowy landscape. Camera automatically adjusts and corrects exposure value (EV). Fireworks For shooting at night and fireworks. Shutterspeed is slower than normal. (Use
  • GE E1250TW | User Manual (English) - Page 51
    's default direction is from left to right). The camera will go into shooting mode 3 seconds later if no direction has been specified. 3. In this mode, there are two panorama stitching methods. You can select Auto or Manual mode in the Shoot Menu (Please refer to Page 56 for Shoot Menu settings
  • GE E1250TW | User Manual (English) - Page 52
    to compose your picture before you press the shutter button to finish manual stitching. Image stitching will remain activated throughout the shooting process until the camera runs out of battery. Touch the button to have the camera return to the standby screen without saving. Touch the button to
  • GE E1250TW | User Manual (English) - Page 53
    minimizes the effect of hand shake and allows you to take pictures that would otherwise be blurred. 1. Touch the Image Stablization mode button in the camera menu and then press to enter. 2. Press the shutter halfway to focus on the subject. 3. Press the shutter fully to capture the image. Use
  • GE E1250TW | User Manual (English) - Page 54
    Playback mode Thumbnail view In Playback mode, push the ( ) on the zoom wheel once to display thumbnails of pictures and video clips on the LCD screen. 1. Use the zoom scroll wheel to switch between the 2x2 or 3x3 thumbnail display. 2. Touch the thumbnail image on the screen to view it in full size.
  • GE E1250TW | User Manual (English) - Page 55
    Slideshow In Playback mode, touch the button on the lower right hand corner of the screen to access the Playback menu. Touch the Slideshow button to enter the slideshow playback mode. 1. When the slide plays, touch anywhere on the screen to show the operational buttons. Picture Orientation You can
  • GE E1250TW | User Manual (English) - Page 56
    remain in touch with the screen for more than 1 second at Point 2, the camera will not register your touch input. When the rotation is set, the new image in the selected format, and the original image will be kept in the memory. You will not be able to rotate panorama images 52 that have been
  • GE E1250TW | User Manual (English) - Page 57
    slide left and right on the touch screen to select the images you wish to include audio remark and touch the button to confirm. 3. The camera will now be in recording mode. It will record audio for 60 seconds and stop automatically, or you can stop it by touching the button
  • GE E1250TW | User Manual (English) - Page 58
    appears and press it. After resizing the image, the new image will be saved as a new file. The original image will be kept in the memory. When the original picture size is smaller than 640 ×480, the picture can not be resized again. Rotated pictures cannot be resized. Panoramic pictures cannot
  • GE E1250TW | User Manual (English) - Page 59
    screen until text information of the selected image appears. 2. Select the image you wish to crop and touch the button; zoom in/out of the selected image by using the zoom scroll wheel or touch control. Touch and press for at least 1 second to drag the image and specify the area to
  • GE E1250TW | User Manual (English) - Page 60
    Operational menus Photograph setting Mode icon: In the Photograph mode, touch the button on the screen directly to show the Photograph Configuration. In any photograph mode, touch the button to enter set up menu. Changing settings: 1. Touch and slide up or down on the touch screen to scroll through
  • GE E1250TW | User Manual (English) - Page 61
    There are four options: • 10 Sec. • 1 Min. • 30 Sec. • 5 Min. When the continuous shot mode is active, the flash will not function in order to allow faster shutter speed. • 3 Shots (Last): Capture pictures continuously until the shutter button is released but only the last 3 shots are recorded. •
  • GE E1250TW | User Manual (English) - Page 62
    quality: Normal AF mode Use this setting to control the auto-focus mechanism while taking pictures. • Touch-to-Focus: Manually select any object in the focus area and the camera will automatically focus on the selected object. Expo metering Use this setting to select an area for the exposure to be
  • GE E1250TW | User Manual (English) - Page 63
    menu; the camera will perform expo metering automatically based on the manually adjusted focal position. Digital zoom This setting allows you to turn on/off the digital zoom function. When the digital zoom is turned off, only the optical zoom is available. Quick review This setting allows
  • GE E1250TW | User Manual (English) - Page 64
    disable the function. • Off • Print Date • Print Date/Time 60 When the AF-assist beam is turned on, hold the shutter button halfway, and the camera will project the AF beam at the subject for focus assistance.
  • GE E1250TW | User Manual (English) - Page 65
    camera detects that a person's eyes are closed. take a while to be processed and displayed after shooting. (The Slow Shutter is only available under the Manual is set to zero. You need to reset the value for every shot. The default value of the camera is 0 seconds. The use of tripod is recommended
  • GE E1250TW | User Manual (English) - Page 66
    recording setup menu and configure image quality by touching the desired option. When you have set image size to 1280x720, the maximum video recording time will be 29 minutes. Expo Metering Setup: 1. Touch the desired expo metering option. The three image sizes correspond to the following image
  • GE E1250TW | User Manual (English) - Page 67
    Playback Setup Menu In Playback mode, touch the button on the lower right hand corner of the screen until the button appears; touch the Return button to go to the Playback Setup menu. Protect This setting allows you to protect and lock one or more pictures or movies from being erased. In Playback
  • GE E1250TW | User Manual (English) - Page 68
    all images, or press Cancel to return to the previous menu. 4. Select 'Reset' to cancel all protection. A key icon will appear on the left of the screen to indicate that the picture/video is protected. 64 Delete The camera provides three deleting options. Files that are deleted cannot be recovered
  • GE E1250TW | User Manual (English) - Page 69
    , the file has been protected. Please cancel the protection before deleting the file. Once the file has been deleted, all configured DPOF values must be reset. (see page 66) 65
  • GE E1250TW | User Manual (English) - Page 70
    enter the set up menu. • One: Manually select each image to be printed with or without the date. • All: Add all images on your memory card for printing with or without date. • Reset: Reset existing DPOF values. 66 • Play Effect: Off, Type 1, Type 2 • Play Interval: 1 sec., 3 sec., 5 sec. • Repeat
  • GE E1250TW | User Manual (English) - Page 71
    show the Setting menu. Touch the camera setting button to enter the camera setting menu. Format memory The Format Memory function will erase all data on the memory card and internal camera memory, including protected files. 1. Press Format memory in the camera setting menu. 2. Press Yes and button
  • GE E1250TW | User Manual (English) - Page 72
    to adjust the volume of beep when buttons are pressed and change the tones for shutter, buttons, self-timer, and power-on/-off. 1. In the camera setting menu, select the Beep setting. 2. Touch the button to enter the sub-menu of the setting you want to set up. 3. In the sub
  • GE E1250TW | User Manual (English) - Page 73
    of your LCD screen. 1. In the camera setting menu, select LCD Brightness. 2. Touch the Auto or Manual press button to confirm. button and then Power saver This setting allows you to save power and get the maximum possible running time for your battery. Follow the steps below to turn off
  • GE E1250TW | User Manual (English) - Page 74
    a useful function on your overseas trips. This feature enables you to display the local time on the LCD screen while you are overseas. 1. In the camera setting menu, select Time zone to enter the World Time menu. 3. Press the button to confirm the date and time setting. 2. Press the buttons to
  • GE E1250TW | User Manual (English) - Page 75
    whether the numbers should continue from the last photo taken or reset the counter to 1 and save the files in a new folder on the memory card. 1. In the camera setting menu, select File numbering to enter the setting. 2. Select Reset or Continue. Press the button to confirm. Language This setting
  • GE E1250TW | User Manual (English) - Page 76
    stored in the internal memory to the memory card. 1. In the camera setting menu, select Copy to card. 2. Select Yes or No, and press the button to complete. The camera supports two different video output signals - NTSC or PAL, depending on the region. NTSC: USA, Canada, Taiwan, Japan, etc. PAL
  • GE E1250TW | User Manual (English) - Page 77
    is found in the SD card, the screen shows the current camera firmware version of the camera. 3. When a new firmware version is found in the SD card, select Yes to continue the update (or No to cancel). Press the button to confirm. When there is only one bar of battery remaining, you will not be
  • GE E1250TW | User Manual (English) - Page 78
    the USB/AV OUT port on your camera. 3. Connect the plugs on the other end of the cable to the audio and video input ports on the TV. 4. Turn on the camera and the TV. 74 Video Audio Make sure that both the camera and TV are turned off before connecting the AV cable. Use a fully charged battery to
  • GE E1250TW | User Manual (English) - Page 79
    signals are transmitted. Direct transmission of digital video signals to your TV reduces conversion loss and improves image viewing quality. HDMI setup mode HDMI connection can be set to automatic or manual in the HDMI setup menu: 1. In the Camera Setting menu, choose HDMI setup. 2. Select the
  • GE E1250TW | User Manual (English) - Page 80
    will automatically render images at the highest resolution possible. Manual mode: Select the resolution that is supported by the display from the output formats available on the camera and choose the appropriate screen color format supported by the display. 76 Select resolution Select screen color
  • GE E1250TW | User Manual (English) - Page 81
    TV resolution for video playback is 1280 x 720P. Refer to your TV instruction manual for information on what resolution sizes it will support. The resolution and output formats that are not supported will be grayed out on the camera's LCD screen. Connecting to the PC Use the USB Cable and ArcSoft
  • GE E1250TW | User Manual (English) - Page 82
    directory on your PC as you would copy any typical folder or file. By using the USB Cable, you can transfer the captured picture(s) and video(s) to a PC. Follow the steps below to connect the camera to a PC. 1. Start up a computer to which the ArcSoft software has been installed. 2. Make sure both
  • GE E1250TW | User Manual (English) - Page 83
    is set to [PC] : Turn off the camera and disconnect the USB Cable. If the USB option is set to [PC (PTP)] : Remove the camera from the system as described below before turning off the camera and disconnecting the USB cable. Windows XP Home Edition/XP Professional Click the [Safely Remove Hardware
  • GE E1250TW | User Manual (English) - Page 84
    printer PictBridge allows printing images from a memory card in a digital camera directly to a printer, regardless of brand. To find out if a printer is PictBridge compatible, simply look for the PictBridge logo on the packaging or check the manual for specifications. With the PictBridge function
  • GE E1250TW | User Manual (English) - Page 85
    USB port on the printer. If the camera is not connected to a PictBridge compatible printer, the following error message will appear on the LCD screen. The above error message would also appear if the USB mode were set incorrectly, in which case you should disconnect the USB cable, check the USB
  • GE E1250TW | User Manual (English) - Page 86
    Using the PictBridge menu After setting the USB mode to printer, the DPS menu will appear. With/Without the picture date printed When you have set the date and time in the camera, all pictures you have taken will be saved with the date and time. See the following steps to print out
  • GE E1250TW | User Manual (English) - Page 87
    images have been set. The screen below will be shown when confirmed: Print all index This function allows you to print all images in the camera in a thumbnail index. 1. In the DPS menu, select Print all index items. The screen will show as below. 5. When the printing is complete, the
  • GE E1250TW | User Manual (English) - Page 88
    cable Select the USB Disconnecting icon at the upper right corner of the screen to exit the DPS menu. The screen shows the 'Disconnect the USB cable' message. 2. Select Yes to continue (or No to cancel). Once this message is shown on screen it is safe to disconnect the USB cable from the camera
  • GE E1250TW | User Manual (English) - Page 89
    Appendices Specifications : E1250TW "Design and specifications are subject to change without notice." Effective Image Sensor Pixels Image Sensor Focal Length F = 35mm film equivalent F number Lens Lens Construction Optical Zoom Focusing Range Anti-Handshake Digital Zoom Number of
  • GE E1250TW | User Manual (English) - Page 90
    Image Compression DCF, DPOF (Ver1.1) Support Still Image File Format Movie Audio Shooting Modes JPEG) Image Compression: MPEG4, Audio: G.711 [Monaural] WAVE [Monaural] (Max 60 seconds) Auto, Manual, Image Stabilization, Movie, Panorama, Auto Scene mode, Scene (Sport, Children, Indoor, Leaf, Snow,
  • GE E1250TW | User Manual (English) - Page 91
    /Fine Mode) Single Photo, Index (4/9 thumbnails), Slide Show, Movie (Slow-Motion possible), Zoom (Approx. 2X~8X), Audio, Histogram Display Auto (AWB), Daylight, Cloudy, Fluorescent, Fluorescent CWF, Incandescent, Manual Auto/Red-Eye Reduction/Forced Flash/No Flash/Slow Synchro/RedEye Reduction+Slow
  • GE E1250TW | User Manual (English) - Page 92
    Internal Memory: 18MB SD Card/SDHC Card (Up to 8GB support) Other Features PictBridge, ExifPrint Support, Multi-language Support, HD Still Output Jacks USB2.0/AV-OUT (Integrated Proprietary Connector), HDMI socket Power Rechargeable Lithium-ion Battery GB-40, 3.7V 1050mAh Battery Charger
  • GE E1250TW | User Manual (English) - Page 93
    no images in the memory card or in the internal memory. • The lens is probably stuck and the camera will power off automatically. • Unexpected error encountered. • There are no audio files in the memory card or in the internal memory. • The write protection switch in the memory card is set to the
  • GE E1250TW | User Manual (English) - Page 94
    in the memory card is set to the "LOCK" position. • No other actions allowed to perform during video/audio recording. • The battery is out of charge. • The picture format cannot be recognized by the camera. • The camera is not connected to the printer correctly. • There is a problem with camera or
  • GE E1250TW | User Manual (English) - Page 95
    correctly. Camera turns off suddenly during operation. The picture is blurred. Images, video clips, and audio files cannot be saved. • The battery has run out. • The lens is dirty. • appears when taking pictures. • The memory card is full. Solution • Charge the battery or replace with
  • GE E1250TW | User Manual (English) - Page 96
    the files. • The mode dial is in Playback mode. • Replace the memory card with a new one or clean off current memory card. • Delete unwanted images. • The memory card is locked. • Turn the mode dial to any still shooting mode. • The camera is not connected to the printer correctly. • The printer
  • GE E1250TW | User Manual (English) - Page 97
    93
  • GE E1250TW | User Manual (English) - Page 98
    http://www.ge.com/digitalcameras Printed in China
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98

En
User Manual
Digital Camera
E1250TW
Preparations
Basic operation
Camera function controls
Playback
Using the Menus
Camera connectivity
Appendix