Haier HRF-370F User Manual - Page 29
Instructions For The Electromechanical Control Panel
View all Haier HRF-370F manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
English INSTRUCTIONS FOR THE ELECTROMECHANICAL CONTROL PANEL HRF370IT HRF470IT 1. Control panel To operate the appliance, turn the thermostat knob (A) in a clockwise direction from the "OFF" position to a setting that corresponds to the desired level of refrigeration. The thermostat knob can be set to any position between minimum (less cold) and maximum (cold est): MIN - MED - MAX. When the thermostat knob is turned back to OFF, this automatically shuts down the compressor and turns off the light. Use a coin or a screwdriver to adjust the temperature setting; avoid using other sharp utensils such as scissors. 2. Adjusting the temperature When setting the temperature, take into account the following factors: - ambient temperature; - amount of food stored in the appliance; - frequency of door opening; HRF370IT/2 HRF470IT/2 We advise you set the temperature initially mid-way between MED and MAX; by simply observing appliance operation, you will quickly be able to establish the best temperature setting for your needs. Appropriate temperature setting is an important factor for optimum storage of food. The aggressive action of microrganisms causes food to perish quickly: by selecting the appropriate storage temperature, this process can be prevented or at least slowed down. Temperature influences the speed at which microrganisms proliferate. By lowering the temperature, you can slow down such proliferation. For this reason, we recommend you maintain an average temperature inside the refrigerator (5°C or lower). When the thermostat is turned up too high (MAX), in the presence of high ambient temperatures and large amounts of food in the compartment the appliance may run continually, resulting in excessive frost or ice forming on the walls. In these conditions, the thermostat must be turned to a lower setting, in order to restore the correct operation of the appliance and to significantly save energy. 1. Control panel Combi fridge-freezers with two compressors feature two separate thermostat knobs for the refrigerator and freezer: to ensure trouble-free operation of the appliance, check that both thermostat knobs are set appropriately. Use a coin or a screwdriver to adjust the temperature setting; avoid using other sharp utensils such as scissors. - Knob A: allows the refrigerator temperature to be set to any position between minimum (less cold) and maximum (coldest): MIN - MED - MAX. To operate the appliance, turn the thermostat knob (A) in a clockwise direction from the "OFF" position to a setting that corresponds to the desired level of refrigeration. When the thermostat is set to OFF, this automatically shuts down the refrigerator compressor, and turns offthe light. - 11 - - Knob B: allows the Freezer temperature to be set to any position between MIN - MED - MAX - . - Green power ON indicator light C: when lit up, this indicates that the appliance is connected to the mains power supply; the green light should be on at all times, even when the refrigerator thermostat is set to "OFF". - Red alarm indicator light D: when lit up, this indicates that the temperature in the Freezer compartment is too high; the alarm is triggered when the temperature climbs above -3°C and switches off automatically when a suitable temperature is restored. - Yellow /orange E (*): indicator light: when lit up, this indicates that the Super Freezing function has been selected.