HP 6125G HP 6125G & 6125G/XG Blade Switches ACL and QoS Command Refere - Page 26
Parameters, Function, Description, ICMP message name, If the, argument takes
View all HP 6125G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
Parameters established Function Description Specifies the flags for indicating the established status of a TCP connection Parameter specific to TCP. The rule matches TCP connection packets with the ACK or RST flag bit set. If the protocol argument takes icmp (1), you can set the parameters shown in Table 8. Table 8 ICMP-specific parameters for IPv4 advanced ACL rules Parameters Function icmp-type { icmp-type [ icmp-code ] Specifies the ICMP message type | icmp-message } and code Description The icmp-type argument is in the range of 0 to 255. The icmp-code argument is in the range of 0 to 255. The icmp-message argument specifies a message name. Supported ICMP message names and their corresponding type and code values are listed in Table 9. Table 9 ICMP message names supported in IPv4 advanced ACL rules ICMP message name echo echo-reply fragmentneed-DFset host-redirect host-tos-redirect host-unreachable information-reply information-request net-redirect net-tos-redirect net-unreachable parameter-problem port-unreachable protocol-unreachable reassembly-timeout source-quench source-route-failed timestamp-reply timestamp-request ICMP message type 8 0 3 5 5 3 16 15 5 5 3 12 3 3 11 4 3 14 13 ICMP message code 0 0 4 1 3 1 0 0 0 2 0 0 3 2 1 0 5 0 0 21