HP 6125G HP 6125G & 6125G/XG Blade Switches ACL and QoS Command Refere - Page 88
qos wfq group sp, qos wfq weight
View all HP 6125G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 88 highlights
[Sysname-GigabitEthernet1/0/1] qos wfq 0 group 1 byte-count 10 qos wfq group sp Syntax qos wfq queue-id group sp View undo qos wfq queue-id group sp Interface view Default level 2: System level Parameters queue-id: Specifies a queue by its ID, which ranges from 0 to 7. sp: Specifies strict priority (SP) queuing. Description Use qos wfq group sp to assign a queue to the strict priority (SP) group on an interface that performs SP+WFQ queuing. Use undo qos wfq group sp to remove a queue from the SP group on an interface that performs SP+WFQ queuing. This command is available only on a WFQ-enabled interface. Queues in the SP group are scheduled with SP, instead of WFQ. Related commands: display qos wfq interface and qos wfq. Examples # Enable WFQ on interface GigabitEthernet 1/0/1, and assign queue 0 to the SP group. system-view [Sysname] interface gigabitethernet 1/0/1 [Sysname-GigabitEthernet1/0/1] qos wfq [Sysname-GigabitEthernet1/0/1] qos wfq 0 group sp qos wfq weight Syntax qos wfq queue-id group 1 weight schedule-value View undo qos wfq queue-id group 1 weight Interface view Default level 2: System level Parameters queue-id: Specifies a queue by its ID, which ranges from 0 to 7. 83