HP 6125G HP 6125G & 6125G/XG Blade Switches ACL and QoS Command Refere - Page 89
group, weight, qos wfq weight, display qos wfq interface, qos bandwidth queue, qos wfq
View all HP 6125G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 89 highlights
group 1: Assigns a queue to the WFQ group. weight schedule-value: Specifies a scheduling weight for the specified queue. The scheduling weight ranges from 1 to 15. Description Use qos wfq weight to assign a queue to a WFQ group, with a certain scheduling weight, on an interface that performs packet-based WFQ queuing. Use undo qos wfq weight to restore the default WFQ settings of a queue on an interface that performs packet-based WFQ queuing. By default, the scheduling weights of queues 0 through 7 are all 1 on an interface that performs packet-based WFQ queuing. Before configuring this command, make sure that the interface is enabled with packet-based WFQ queuing. Otherwise, the weight configuration does not take effect. Related commands: display qos wfq interface, qos bandwidth queue, and qos wfq. Examples # Enable packet-based WFQ on GigabitEthernet 1/0/1, and assign queue 0, with the scheduling weight 10. system-view [Sysname] interface gigabitethernet 1/0/1 [Sysname-GigabitEthernet1/0/1] qos wfq weight [Sysname-GigabitEthernet1/0/1] qos wfq 0 group 1 weight 10 84