HP 6125G HP 6125G & 6125G/XG Blade Switches ACL and QoS Command Refere - Page 86

qos bandwidth queue, qos wfq

Get HP 6125G PDF manuals and user guides View all HP 6125G manuals
Add to My Manuals
Save this manual to your list of manuals

Page 86 highlights

qos bandwidth queue Syntax qos bandwidth queue queue-id min bandwidth-value View undo qos bandwidth queue queue-id [ min bandwidth-value ] Interface view Default level 2: System level Parameters queue-id: Queue ID, ranging from 0 to 7. min bandwidth-value: Sets the minimum guaranteed bandwidth (in kbps) for a queue when the port is congested. This argument ranges from 8 to 1000000 for a GE port and 8 to 10000000 for a 10-GE port. Description Use qos bandwidth queue to set the minimum guaranteed bandwidth for a specified queue on the port. Use undo qos bandwidth queue to cancel the configuration. By default, the minimum guaranteed bandwidth is 64 kbps for a queue. Configure minimum guaranteed bandwidth only for queues of WFQ-enabled ports. Examples # Set the minimum guaranteed bandwidth to 100 kbps for queue 0 on GigabitEthernet 1/0/1. system-view [Sysname] interface gigabitethernet 1/0/1 [Sysname-GigabitEthernet1/0/1] qos wfq [Sysname-GigabitEthernet1/0/1] qos bandwidth queue 0 min 100 qos wfq Syntax qos wfq [ byte-count | weight ] View undo qos wfq Interface view Default level 2: System level Parameters byte-count: Enables byte-count WFQ, which allocates bandwidth to queues in terms of bytes. weight: Enables packet-based WFQ, which allocates bandwidth to queues in terms of packets. 81

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
81
qos bandwidth queue
Syntax
qos bandwidth queue
queue-id
min
bandwidth-value
undo qos bandwidth queue
queue-id
[
min
bandwidth-value
]
View
Interface view
Default level
2: System level
Parameters
queue-id
: Queue ID, ranging from 0 to 7.
min
bandwidth-value
: Sets the minimum guaranteed bandwidth (in kbps) for a queue when the port is
congested. This argument ranges from 8 to 1000000 for a GE port and 8 to 10000000 for a 10-GE
port.
Description
Use
qos bandwidth queue
to set the minimum guaranteed bandwidth for a specified queue on the port.
Use
undo qos bandwidth queue
to cancel the configuration.
By default, the minimum guaranteed bandwidth is 64 kbps for a queue.
Configure minimum guaranteed bandwidth only for queues of WFQ-enabled ports.
Examples
# Set the minimum guaranteed bandwidth to 100 kbps for queue 0 on GigabitEthernet 1/0/1.
<Sysname> system-view
[Sysname] interface gigabitethernet 1/0/1
[Sysname-GigabitEthernet1/0/1] qos wfq
[Sysname-GigabitEthernet1/0/1] qos bandwidth queue 0 min 100
qos wfq
Syntax
qos wfq
[
byte-count
|
weight
]
undo qos wfq
View
Interface view
Default level
2: System level
Parameters
byte-count
: Enables byte-count WFQ, which allocates bandwidth to queues in terms of bytes.
weight
: Enables packet-based WFQ, which allocates bandwidth to queues in terms of packets.